Please note all ports documented in this article are the default ports for their respective services.
All outbound ports are also configurable, and depend on the configuration of the service Unimus connects to.
All inbound ports are also fully configurable, with links to documentation provided below.
...
Purpose | Destination | Protocol + Port | |
---|---|---|---|
Zones - zone proxy / local poller | |||
Remote Core used as a Zone proxy / local poller | Configured by user | TCP 5509 | |
NetXMS Agent used as a Zone proxy / local poller (only used if using Zones with "NetXMS Agent" connection method) | Configured by user | TCP 4701 | |
NMS Sync (importers) | |||
NetXMS importer | Configured by user | TCP 4701 | |
Zabbix importer | Configured by user | TCP 80 / TCP 443 | |
Powercode importer | Configured by user | TCP 80 / TCP 443 | |
PRTG importer | Configured by user | TCP 80 / TCP 443 | |
Observium importer | Configured by user | TCP 80 / TCP 443 | |
Panopta importer | https://aggregator2.panopta.com | TCP 443 | |
LibreNMS importer | Configured by user | TCP 80 / TCP 443 | |
Network Scan | |||
Network Scan - ICMP (even if ICMP does not respond, network scan will scan SSH / Telnet if enabled) | Any Network Scan destinations | ICMP | |
Network Scan - SSH (Network Scan uses the default SSH connector settings) | Any Network Scan destinations | TCP 22 | |
Network Scan - Telnet (disabled by default) (Network Scan uses the default Telnet connector settings) | Any Network Scan destinations | TCP 23 | |
Notifications | |||
Email notification sender | Configured by user | TCP 25 | |
Pushover notification sender | https://api.pushover.net | TCP 443 | |
Slack notification sender | TCP 443 | ||
External AAA | |||
Radius - authentication and authorization | Configured by user | UDP 1812 | |
Radius - accounting | Configured by user | UDP 1813 |