Currently, Unimus supports:
3Com 29XX switch series 3Com non-switch devices (chassis, routers, etc.) 3Com switches (Comware) 6WIND Turbo Router A10 Networks AX series A10 Networks Thunder series A10 Networks vThunder series Adit 600 series Adtran NetVanta Adtran Total Access Adtran TA (Total Access) 2nd gen. ADVA MasterOS switches Alcatel Lucent TiMOS (SR, ISAM and SAS) Alcatel OmniSwitch switches Allied Telesis AlliedWare Araknis switches Arista switches Arista vEOS Arris E6000 CER Aruba ArubaOS switches Aruba ArubaOS-CX devices (Aruba / HPE 8320) Aruba IAP (Aruba Instant) Aruba Mobility Conductor Aruba Mobility Controller Aruba Wireless Controllers AudioCodes Mediant AudioCodes MP-11x AudioCodes MP-12x Aviat Radios (WTM4200) Avaya ERS Blonder Tongue CMTS Brocade FastIron Brocade FastIron Chassis Brocade FOS Brocade G620 Brocade ICX switches Brocade MLXe Brocade NetIron Brocade NetIron Chassis Brocade NOS Brocade SLX-OS switches Brocade TurboIron Calix B6 Calix BLC Calix E7 Calix OccamOS Cambium ePMP series Casa CMTS Ciena Service-aware OS (SAOS) Cisco ASA Cisco ASA FirePower Cisco ASA multi-context Cisco ASA TD Cisco CRS series Cisco Fire Linux OS (FirePower TDM) Cisco FirePOWER (FX-OS) Cisco FirePOWER for AWS Cisco FirePOWER for VMware Cisco IE (industrial ethernet) switches Cisco IOS switches Cisco IOS routers Cisco IOS XE Cisco IOS XR Cisco MDS switches Cisco NCS series Cisco Nexus Cisco NXOS (generic NXOS support) Cisco RF-Gateway Cisco SMB SF2xx / SG2xx / SX2xx switch series Cisco SMB switches (SF300, SG300, SF500, SG500, etc.) Cisco WLC (wireless controllers) Citrix NetScaler CTS switches (FOS-3128, etc.) Cumulus Linux D-Link / Dlink 1510 switch series D-Link / Dlink 3200 switch series D-Link / Dlink 3528 switch series D-Link / Dlink 3552 switch series D-Link / Dlink 3620 switch series D-Link / Dlink DXS 5000 series D-Link / Dlink xStack switches D-Link / Dlink SmartPro switches Datacom DmOS devices Datacom DmSwitch devices Datacom routers Datacom switches DCN switches Dell EMC OS10 Dell Force10 (RTOS) Dell FTOS switches / chassis Dell PowerConnect switches (not all series supported yet) Dell PowerConnect 8024 (and similar PowerConnect switches) Dell Networking N-series switches Dell Networking switches (RTOS) Dell switches (OS10) Dell X series switches DragonWave Horizon Compact DragonWave Horizon Compact+ Draytek Vigor (Discovery and Config Push only, Backup not supported) EdgeCore switches Eltex ME routers Eltex MES switches Eltex ESR gateways Exablaze Fusion switches Exalt ExtendAir Exinda devices Extreme 200 series Extreme ERS Extreme EXOS Extreme Extremeware Extreme MLXe Extreme SLX-OS switches Extreme VOSS / VSP OS Extreme WiNG APs F5 BIG-IP F5 BIG-IQ Fiberhome devices Fiberstore (FS.com) switches Fiberstore (FS.com) Campus switches FireBrick devices Fortinet FortiAnalyzer Fortinet FortiExtender Fortinet FortiGate Fortinet FortiOS (FortiADC, FortiWiFi, FortiMail, etc.) Fortinet FortiWeb Fortinet FortiWLC Foundry FastIron Foundry FastIron Chassis Foundry TurboIron Foundry TurboIron Chassis FreeNAS GCOM switches H3C Comware switches Halon SecurityRouter Harmonics CMTS HP Blade Switch (BladeCenter) HP BladeSystem OA HP Comware routers HP Comware switches HP MSA Storage HP MSM Controller HP ProCurve switches HP ProCurve stack HP v1910 switch series HP 1920 switch series HP 1950 switch series HPE 1920S switch series HPE StoreFabric devices HPE VirtualConnect Huawei Eudemon Huawei Quidway switches Huawei routers (H3C / Comware) Huawei SmartAX (Integrated Access Software OLTs) Huawei switches (H3C / Comware) Huawei VRP (including HRP, multi-context, etc.) IBM Flex System Fabric IBM RackSwitch switches IgniteNet FusionSwitch IgniteNet MetroLinq InfiNet WANFleX devices InfoBlox Juniper JUNOS Juniper SSG LANCOM routers LANCOM switches (Discovery and Config Push only, Backup not supported) Lenovo Flex System Fabric Lenovo RackSwitch switches Lenovo ThinkSystems RackSwitch switches Meinberg LANTIME Mellanox InfiniBand switches Mellanox switches Metamako devices MicroSens Switches MikroTik RouterOS (this includes: RB, CCR, CRS, x86, CHR, etc.) Moxa switches MRV MasterOS switches Netgate Appliances with pfSense Plus Netgear GSM switches Netgear ProSafe M-series switches (M4300, etc.) NetScreen (ScreenOS devices) Netonix switches Nokia SR OS (SR, ISAM and SAS) Nomadix AG Nomadix EG Nomadix NSE OcNOS (switches running OcNOS) Omnitron RuggedNet switches OpenWRT OPNsense Palo Alto firewalls Palo Alto Panorama Patton / Inalp SmartNode Perle IOLAN Planet DSLAMs Planet switches pfSense pfSense Plus Quanta switches Ruckus FastIron Ruckus FastIron Chassis Ruckus ICX switches Ruckus NetIron Chassis Ruckus standalone APs Ruckus TurboIron Ruckus Unleashed Ruckus Wireless Bridges Ruckus ZoneDirector SAF Tehnika Lumina Siklu EtherHaul Siklu Terragraph SonicWall devices (SonicOS) Sophos UTMs (Astaro) Telco Systems T-Marc devices TP-Link switches (JetStream series and Smart Switch series switches) TrueNAS Turris OS devices (Turris Omnia, etc.) Ubiquiti airFiber Ubiquiti airFiber 60 Ubiquiti airMax Ubiquiti EdgePoint Ubiquiti EdgePower Ubiquiti EdgeRouter Ubiquiti EdgeSwitch Ubiquiti EdgeSwitch 10X Ubiquiti GigaBeam Ubiquiti TOUGHSwitch Ubiquiti UFiber OLT Ubiquiti UniFi APs Ubiquiti UniFi switches Vyatta VyOS WatchGuard (Fireware OS) Zhone MXK ZTE ZXA / ZXAN ZTE ZXR10 Zyxel switches (GS22xx series, etc.) ZyXel IES (MSC) Zyxel MGS switches Zyxel USG Zyxel VPN Zyxel XGS ZyXel ZyWALL
11 Comments
Anonymous
Kemp load balancer is supported?
Tomas Kirnak
Hi, not yet.
We had requests for Kemp support already, we expect in the next few months it should be included.
Normally implementing a new vendor is much faster, but Kemp doesn't support backup over CLI.
Only way to backup Kemp is over HTTP(S).
We have HTTP(S) connector support on the Roadmap in the next few months, but we need to implement that before we can support Kemp
Anonymous
Do you plan on F5 support as well?
Tomas Kirnak
Hi,
Just wanted to provide an update - we have added support for F5 gear recently.
Anonymous
Any plans to backup the UniFi controller info? I know you can from it but I'd rather have multiple backups.
Tomas Kirnak
Hi,
The situation with the UniFi controller is similar to the Kemp question above.
To summarize, we need the HTTP(S) connector support before we are able to support the UniFi controller.
We have HTTP(S) connector support on the Roadmap in the next few months.
So expect support for the UniFi controller coming around the end of Q2 2018.
Anonymous
Thank you, I appreciate it. Just in time for me to migrate to a Meraki setup at home but my UniFi setup will live on at my parents house so I really want a good backup in place.
Anonymous
Any plans to backup ESXi &/or Proxmox configurations?
Tomas Kirnak
Hi,
We are planning support for both.
(for ESXi, it will of course require that SSH is enabled on the ESXi host)
The support should be available by the end of Q2 2018.
Anonymous
What about Adtran support?
Tomas Kirnak
Hi,
Just an update here, Adtran devices are now supported!