Currently, Unimus supports:
3Com 29XX switch series 3Com non-switch devices (chassis, routers, etc.) 3Com switches (Comware) A10 Networks Thunder series Adtran NetVanta Adtran Total Access Adtran TA (Total Access) 2nd gen. Alcatel Lucent TiMOS (SR, ISAM and SAS) Alcatel OmniSwitch switches Allied Telesis AlliedWare Araknis switches Arista switches Aruba ArubaOS switches Aruba IAP (Aruba Instant) Aruba Wireless Controllers AudioCodes Mediant AudioCodes MP-11x AudioCodes MP-12x Brocade FastIron Brocade FOS Brocade ICX switches Brocade MLXe Brocade NetIron Brocade NOS Brocade SLX-OS switches Brocade TurboIron Calix B6 Calix BLC Calix E7 Calix OccamOS Cambium ePMP series Ciena Service-aware OS (SAOS) Cisco ASA Cisco ASA FirePower Cisco ASA multi-context Cisco CRS series Cisco Fire Linux OS (FirePower TDM) Cisco FirePOWER (FX-OS) Cisco IOS switches Cisco IOS routers Cisco IOS XE Cisco IOS XR Cisco MDS switches Cisco NCS series Cisco Nexus Cisco NXOS (generic NXOS support) Cisco RF-Gateway Cisco SMB SF2xx / SG2xx / SX2xx switch series Cisco SMB switches (SF300, SG300, SF500, SG500, etc.) Cisco WLC (wireless controllers) Citrix NetScaler Cumulus Linux D-Link 1510 switch series D-Link 3200 switch series D-Link 3528 switch series D-Link 3552 switch series D-Link 3620 switch series D-Link xStack switches D-Link SmartPro switches DCN switches Dell EMC OS10 Dell Force10 (RTOS) Dell FTOS switches / chassis Dell PowerConnect switches (not all series supported yet) Dell PowerConnect 8024 (and similar PowerConnect switches) Dell Networking N-series switches Dell Networking switches (RTOS) Dell switches (OS10) DragonWave Horizon Compact DragonWave Horizon Compact+ EdgeCore switches Exablaze Fusion switches Exalt ExtendAir Extreme EXOS Extreme Extremeware Extreme SLX-OS switches Extreme WiNG APs F5 BIG-IP F5 BIG-IQ Fiberstore switches FireBrick devices Fortinet FortiGate Fortinet FortiOS (FortiADC, FortiWiFi, FortiMail, etc.) Foundry FastIron Foundry TurboIron GCOM switches Halon SecurityRouter H3C Comware switches HP Blade Switch (BladeCenter) HP BladeSystem OA HP Comware routers HP Comware switches HP MSA Storage HP MSM Controller HP ProCurve switches HP ProCurve stack HP v1910 switch series HP 1920 switch series HP 1950 switch series HPE 1920S switch series Huawei Quidway switches Huawei routers (H3C / Comware) Huawei switches (H3C / Comware) Huawei VRP IgniteNet FusionSwitch IgniteNet MetroLinq InfiNet WANFleX devices Juniper JUNOS Juniper SSG LANCOM routers Lenovo Flex System Fabric Lenovo RackSwitch switches Lenovo ThinkSystems RackSwitch switches Mellanox switches Metamako devices MikroTik RouterOS (this includes: RB, CCR, CRS, x86, CHR, etc.) NetScreen (ScreenOS devices) Netonix switches Nokia SR OS (SR, ISAM and SAS) Nomadix AG OcNOS (switches running OcNOS) Palo Alto firewalls Patton / Inalp SmartNode Planet DSLAMs Planet switches pfSense Quanta switches Ruckus FastIron Ruckus ICX switches Ruckus standalone APs Ruckus TurboIron Ruckus Unleashed Ruckus Wireless Bridges Ruckus ZoneDirector Siklu EtherHaul SonicWall devices (SonicOS) Sophos UTMs (Astaro) Telco Systems T-Marc devices TP-Link switches (JetStream series and Smart Switch series switches) Turris OS devices (Turris Omnia, etc.) Ubiquiti airFiber Ubiquiti airMax Ubiquiti EdgePoint Ubiquiti EdgeRouter Ubiquiti EdgeSwitch Ubiquiti TOUGHSwitch Ubiquiti UniFi APs Ubiquiti UniFi switches Vyatta VyOS WatchGuard (Fireware OS) ZTE ZXR10 Zyxel switches (GS22xx series, etc.) Zyxel MGS switches Zyxel USG Zyxel VPN Zyxel XGS ZyXel ZyWALL
11 Comments
Anonymous
Kemp load balancer is supported?
Tomas Kirnak
Hi, not yet.
We had requests for Kemp support already, we expect in the next few months it should be included.
Normally implementing a new vendor is much faster, but Kemp doesn't support backup over CLI.
Only way to backup Kemp is over HTTP(S).
We have HTTP(S) connector support on the Roadmap in the next few months, but we need to implement that before we can support Kemp
Anonymous
Do you plan on F5 support as well?
Tomas Kirnak
Hi,
We have had F5 support on the ToDo list for a while now, but have had issues getting proper access to one.
We haven't been able to make it run in GNS either.
If you have an F5 in a lab somewhere and are willing to help out, please let us know.
Anonymous
Any plans to backup the UniFi controller info? I know you can from it but I'd rather have multiple backups.
Tomas Kirnak
Hi,
The situation with the UniFi controller is similar to the Kemp question above.
To summarize, we need the HTTP(S) connector support before we are able to support the UniFi controller.
We have HTTP(S) connector support on the Roadmap in the next few months.
So expect support for the UniFi controller coming around the end of Q2 2018.
Anonymous
Thank you, I appreciate it. Just in time for me to migrate to a Meraki setup at home but my UniFi setup will live on at my parents house so I really want a good backup in place.
Anonymous
Any plans to backup ESXi &/or Proxmox configurations?
Tomas Kirnak
Hi,
We are planning support for both.
(for ESXi, it will of course require that SSH is enabled on the ESXi host)
The support should be available by the end of Q2 2018.
Anonymous
What about Adtran support?
Tomas Kirnak
Hi,
We would be glad to add support, but we need access to a device for development and testing purposes.
Would it be possible to have access to one of these in a lab for driver development?
If you are willing to help us, please contact us over email or forums, and we can add a driver.
Thanks!