Unimus
Page tree

Versions Compared

Old Version 1

changes.mady.by.user Tomas Kirnak

Saved on

compared with

New Version 2

changes.mady.by.user Tomas Kirnak

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

You should open the following ports inbound to your Unimus server:

PurposeProtocol + Port
Web UI (default value - can be configured)
Configuring server port or bind address		TCP 8085

Core connection port - used for Remote Cores (default value - can be configured)
configured in "/etc/unimus/unimus.properties" or "C:\ProgramData\Unimus\unimus.properties"

TCP 5509

Outbound

Unimus will open outbound connections to the following destinations / ports:

PurposeDestinationProtocol + Port
License validation

https://licensing.unimus.net

TCP 443
Device communication SSH
(default value - can be configured globally or per device)

Any device added to Unimus
Any Network Scan destinations

TCP 22
Device communication Telnet (disabled by default)
(default value - can be configured globally or per device)		Any device added to Unimus
Any Network Scan destinations		TCP 23
Network Scan - ICMP
(even if ICMP does not respond, network scan will scan SSH / Telnet if enabled)		Any Network Scan destinationsICMP
NetXMS Agent used as a Zone proxy
(only used if using Zones with "NetXMS Agent" proxy)		Configured by userConfigured by user
(default TCP 4701)