Unimus
Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Inbound

You should open the following ports inbound to your Unimus server:

PurposeProtocol + Port
Web UI (default value - can be configured)
Configuring server port or bind address		TCP 8085

Core connection port - used for Remote Cores (default value - can be configured)
configured in "/etc/unimus/unimus.properties" or "C:\ProgramData\Unimus\unimus.properties"

TCP 5509

Outbound

Unimus will open outbound connections to the following destinations / ports:

PurposeDestinationProtocol + Port
License validation

https://licensing.unimus.net

TCP 443
Device communication SSH
(default value - can be configured globally or per device)

Any device added to Unimus
Any Network Scan destinations

TCP 22
Device communication Telnet (disabled by default)
(default value - can be configured globally or per device)		Any device added to Unimus
Any Network Scan destinations		TCP 23
Network Scan - ICMP
(even if ICMP does not respond, network scan will scan SSH / Telnet if enabled)		Any Network Scan destinationsICMP
NetXMS Agent used as a Zone proxy
(only used if using Zones with "NetXMS Agent" proxy)		Configured by userConfigured by user
(default TCP 4701)
  • No labels