One-time import

You have 2 options for one-time import:

1) Import a list of addresses

This is the fastest way to add devices to Unimus in bulk.
You can simply paste a comma or semicolon separated list od devices, and Unimus will add each of them as a new device.

For example:

10.0.0.1, 10.0.0.2; 10.2.0.1; host.domain.tld, 7001:11::44:1

All valid address formats are supported - IPv4, IPv6 and FQDNs

2) Import devices from a .csv file

If you want to import devices together with descriptions, you can use a .csv file import.

Here, you provide a .csv file to Unimus, that should contain one device per line.
Both "\r" and "\r\n" (LF and CRLF) line terminations are supported.

You can optionally choose to ignore the 1st line of the .csv file - which is usually a header.

Example of the .csv file:

# Device, description
10.0.0.1, Edge router
10.0.0.2, VPN router
7001:11::44:1, Switch

In the above example, we would check the "Ignore .csv file header (1st line of file)" checkbox.

All valid address formats are supported - IPv4, IPv6 and FQDNs

NMS sync

For more details on each NMS sync connector, please see the appropriate articles: